5G | Echoic RF Store https://store.echoicrf.com/product-tag/5g/ High Performance RF and Microwave Components Thu, 23 Apr 2026 05:50:21 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 https://i0.wp.com/store.echoicrf.com/wp-content/uploads/2021/04/echoic_store_favicon-e1619586934604.png?fit=32%2C32&ssl=1 5G | Echoic RF Store https://store.echoicrf.com/product-tag/5g/ 32 32 132856500 EC-BSF3-2450M-100 Bandstop Filter for 2.45 GHz https://store.echoicrf.com/product/ec-bsf3-2450m-100/ https://store.echoicrf.com/product/ec-bsf3-2450m-100/#respond Thu, 18 Jul 2024 18:29:39 +0000 https://store.echoicrf.com/?post_type=product&p=1194 The EC-BPF3-2450M-100 is a high performance bandpass filter realized using microstrip transmission-lines on a low-loss microwave laminate.  This filter can be used for test and measurement or for educational demonstration.  The filter passes the widely-used 2.45 GHz WiFi/ISM/Bluetooth/Zigbee band with a bandwidth of 100 MHz and an out of band rejection of > 35dB at 2.05 GHz and 2.85 GHz.

Quantities greater than our inventory can be backordered, please contact us.

The post EC-BSF3-2450M-100 Bandstop Filter for 2.45 GHz appeared first on Echoic RF Store.

]]> The EC-BSF3-2450M-100 is a high-performance bandstop filter realized using microstrip transmission-lines on a low-loss microwave laminate. This filter can be used for test and measurement or for educational demonstration. The filter attenuates the widely-used 2.45 GHz WiFi/ISM/Bluetooth/Zigbee band with a bandwidth of 100 MHz and an in-band rejection of > 18dB. It is very low-loss out of the stop band. The filter is realized using ring resonators coupled to a microstrip transmission line for low-loss and high-power handling, while also passing DC. As a transmission line-based microstrip circuit, the filter will exhibit a periodic response at 4.9 GHz. The filter is equipped with female SMA connectors on both ports. The backside solder mask is absent, enabling it to be surface mounted if the connectors are removed.

Specifications

Parameter Condition Value
Impedance 50 ohm
Center Frequency 2.450 GHz
Bandwidth 100 MHz
Stopband rejection 2.370 to 2.484 GHz 18 dB min
Insertion loss 0.000 to 2.324 GHz 3 dB max
2.542 to 4.480 GHz 3 dB max
Input power CW 10 W min

 

Data

Type File Download
S-parameters .s2p

Download Data Sheet (PDF)

 

The post EC-BSF3-2450M-100 Bandstop Filter for 2.45 GHz appeared first on Echoic RF Store.

]]> https://store.echoicrf.com/product/ec-bsf3-2450m-100/feed/ 0 1194 EC‐BIAS‐TM High Power DC Bias Network 50 MHz to 6 GHz https://store.echoicrf.com/product/ec%e2%80%90bias%e2%80%90tm/ https://store.echoicrf.com/product/ec%e2%80%90bias%e2%80%90tm/#respond Sun, 14 Jul 2024 19:14:46 +0000 https://store.echoicrf.com/?post_type=product&p=1190 The EC-BIAS-T is a high-power, high-voltage, high-current DC bias network (bias tee) for RF transistor biasing applications.  This static DC bias network can be used for RF and microwave transistor characterization as well as broadband, low-noise and power amplifier development.  The DC bias network has three ports:  RF, DC and RF+DC.  The RF port accepts RF signals, the DC port accepts DC biases, and the RF+DC port presents the combined signal to the device.  The EC-BIAS-T can handle DC voltages up to 200 V and DC currents up to 4 A.  The DC bias network is especially well-suited for biasing high-voltage, high-current RF power devices like GaN HEMT transistors.

Quantities greater than our inventory can be backordered, please contact us.

The post EC‐BIAS‐TM High Power DC Bias Network 50 MHz to 6 GHz appeared first on Echoic RF Store.

]]> The EC-BIAS-TM is a high-power, high-voltage, high-current DC bias network (bias tee) for RF transistor biasing applications. This static DC bias network can be used for RF and microwave transistor characterization as well as broadband, low-noise and power amplifier development. The DC bias network has three ports: RF, DC and RF+DC. The RF port accepts RF signals, the DC port accepts DC biases, and the RF+DC port presents the combined signal to the device. The EC-BIAS-TM can handle DC voltages up to 200 V and DC currents up to 4 A. The DC bias network is especially well-suited for biasing high-voltage, high-current RF power devices like GaN HEMT transistors.

The RF-to-RF+DC path operates from 50 MHz to 6 GHz when considering a maximum insertion loss of 1.6 dB and minimum return loss of 13 dB. The DC-to-RF and DC-to-RF+DC isolation is > 27 dB.

Specifications

Parameter Test Cond. Val.
Impedance 50 Ohm
Operating Frequency IL < 1.6 dB 0.05 to 6.0 GHz
VSWR 0.05 to 6 GHz 1.6
Return Loss 0.05 to 6 GHz 12 dB max
Insertion loss 0.05 to 6 GHz 1.6 dB max
Isolation 0.05 to 6 GHz 27 dB min
DC port voltage 200 VDC
DC port current 4 ADC
RF Power f0 = 2 GHz 20 W (+43 dBm)

 

Data

Type File Download
S-parameters .s2p

Download Data Sheet (PDF)

 

The post EC‐BIAS‐TM High Power DC Bias Network 50 MHz to 6 GHz appeared first on Echoic RF Store.

]]> https://store.echoicrf.com/product/ec%e2%80%90bias%e2%80%90tm/feed/ 0 1190 EC-HBD2-2450M Branchline Hybrid Coupler 2.2-2.8 GHz https://store.echoicrf.com/product/ec-hbd2-2450m/ https://store.echoicrf.com/product/ec-hbd2-2450m/#respond Wed, 13 Jan 2021 05:59:36 +0000 http://store.echoicrf.com/?post_type=product&p=963 The EC-HBD2-2450M is a two-stage Branchline quadrature (90°) hybrid coupler realized using microstrip transmission-lines on a low-loss microwave laminate.  The EC-HBD2-2450M can be used for RF signal processing, test and measurement or educational demonstration.  The EC-HBD2-2450M is centered at the widely-used 2.45 GHz WiFi/ISM/Bluetooth/Zigbee band with a bandwidth of 600 MHz when considering a return loss of 20dB.  In-band loss is very low and ranges from 0.01 to 0.6dB providing an equal split from port 1 to ports 2 and 3.  The port 1 to port 4 (and port 2 to port 3) in-band isolation is > 20dB for 600GHz of bandwidth.  The EC-HBD2-2450M maintains an 90° phase difference between ports 2 and 3 with a phase error of 2.3° from 2.20 to 2.80 GHz.

Quantities greater than our inventory can be backordered, please contact us.

The post EC-HBD2-2450M Branchline Hybrid Coupler 2.2-2.8 GHz appeared first on Echoic RF Store.

]]> The EC-HBD2-2450M is a two-stage Branchline quadrature (90°) hybrid coupler realized using microstrip transmission-lines on a low-loss microwave laminate.  The EC-HBD2-2450M can be used for RF signal processing, test and measurement or educational demonstration.  The EC-HBD2-2450M is centered at the widely-used 2.45 GHz WiFi/ISM/Bluetooth/Zigbee band with a bandwidth of 600 MHz when considering a return loss of 20dB.  In-band loss is very low and ranges from 0.01 to 0.6dB providing an equal split from port 1 to ports 2 and 3.  The port 1 to port 4 (and port 2 to port 3) in-band isolation is > 20dB for 600GHz of bandwidth.  The EC-HBD2-2450M maintains an 90° phase difference between ports 2 and 3 with a phase error of 2.3° from 2.20 to 2.80 GHz.   The EC-HBD2-2450M can be used over an even larger frequency range when considering different isolation and return loss requirements.  The EC-HBD2-2450M is realized on high performance, low-loss Rogers substrate material.  The hybrid coupler is equipped with female SMA connectors on all three ports.  The backside solder mask is absent, enabling it to be surface mounted if the connectors are removed.

Specifications

Impedance 50 ohm
Center Frequency 2.5 GHz
Bandwidth 20dB Return Loss 610 MHz
VSWR 2.2 to 2.8 GHz 1.24 max
Insertion loss 2.2 to 2.8 GHz 3.01-3.60dB
Isolation 2.2 to 2.8 GHz 19.25dB min
Phase Difference

2.20 to 2.80 GHz

Port 2-3, Port 1-4

 90 +/-1.5 deg
Input power CW 10 W min

 

Data

Type File Download
S-parameters .s2p

Download Data Sheet (PDF)

 

The post EC-HBD2-2450M Branchline Hybrid Coupler 2.2-2.8 GHz appeared first on Echoic RF Store.

]]> https://store.echoicrf.com/product/ec-hbd2-2450m/feed/ 0 963 EC-WLK2-2450M Wilkinson Power Divider/Combiner 0.5-4.75 GHz https://store.echoicrf.com/product/ec-wlk2-2450m/ https://store.echoicrf.com/product/ec-wlk2-2450m/#respond Wed, 13 Jan 2021 04:53:19 +0000 http://store.echoicrf.com/?post_type=product&p=940 The EC-WLK2-2450M is an ultra-wide band, two-stage Wilkinson power divider/combiner realized using microstrip transmission-lines on a low-loss microwave laminate.  The EC-WLK2-2450M can be used for RF signal processing, test and measurement or educational demonstration.  The EC-WLK2-2450M is designed around 2.45 GHz but exhibits an ultra-wide bandwidth of 4.5 GHz when considering a return loss of 10dB.  This allows it to operate over a multiplicity of commercial bands including Wi-Fi 2.4GHz, ISM, GSM, LTE and GPS.  In-band loss is very low and ranges from 0.13 to 0.8dB providing an equal split to the two ports.  The in-band isolation is > 10dB for over 3.8GHz of bandwidth.

Quantities greater than our inventory can be backordered, please contact us.

The post EC-WLK2-2450M Wilkinson Power Divider/Combiner 0.5-4.75 GHz appeared first on Echoic RF Store.

]]> The EC-WLK2-2450M is an ultra-wide band, two-stage Wilkinson power divider/combiner realized using microstrip transmission-lines on a low-loss microwave laminate. The EC-WLK2-2450M can be used for RF signal processing, test and measurement or educational demonstration. The EC-WLK2-2450M is designed around 2.45 GHz but exhibits an ultra-wide bandwidth of 4.5 GHz when considering a return loss of 10dB. This allows it to operate over a multiplicity of commercial bands including Wi-Fi 2.4GHz, ISM, GSM, LTE and GPS. In-band loss is very low and ranges from 0.13 to 0.8dB providing an equal split to the two ports. The in-band isolation is > 10dB for over 3.8GHz of bandwidth. The EC-WLK2-2450M is realized on high performance, low-loss Rogers substrate material. The EC-WLK2-2450M is equipped with female SMA connectors on all three ports. The backside solder mask is absent, enabling it to be surface mounted if the connectors are removed.

Specifications

Impedance 50 ohm
Center Frequency 2.45 GHz
Bandwidth 10dB Return Loss 4.5 GHz
VSWR 0.5 to 4.75 GHz 1.8 max
Insertion loss 0.5 to 4.75 GHz 3.13-3.80dB
Isolation 0.6 to 4.40 GHz 10dB min
Phase Imbalance 0.6 to 4.40 GHz, P2 to P3 1 deg max
Input power CW 10 W min

 

Data

Type File Download
S-parameters .s2p

Download Data Sheet (PDF)

 

The post EC-WLK2-2450M Wilkinson Power Divider/Combiner 0.5-4.75 GHz appeared first on Echoic RF Store.

]]> https://store.echoicrf.com/product/ec-wlk2-2450m/feed/ 0 940 EC‐BIAS‐P High Power Pulsed Bias Network 600 MHz to 5 GHz https://store.echoicrf.com/product/ec%e2%80%90bias%e2%80%90p/ https://store.echoicrf.com/product/ec%e2%80%90bias%e2%80%90p/#respond Mon, 14 Dec 2020 05:50:46 +0000 http://store.echoicrf.com/?post_type=product&p=918 The EC-BIAS-P is a high performance bias tee network for pulsed bias applications.  This pulsed bias network can be used for transistor characterization test and measurement as well as for pulsed amplifier development.  The pulsed bias network has three ports:  RF, DC and RF+DC.  The RF port passes RF (“AC”), the DC port is used to feed DC, and the RF+DC (“AC+DC”) port presents the combined signal to the device.  The EC-BIAS-P can handle DC voltages up to 200V and DC currents up to 1A.  Therefore, it is suitable for biasing high power transistor devices like GaN HEMTs.  The EC-BIAS-P can also be used for static DC biasing.

Quantities greater than our inventory can be backordered, please contact us.

The post EC‐BIAS‐P High Power Pulsed Bias Network 600 MHz to 5 GHz appeared first on Echoic RF Store.

]]> The EC-BIAS-P is a high performance bias tee network for pulsed bias applications. This pulsed bias network can be used for transistor characterization test and measurement as well as for pulsed amplifier development. The pulsed bias network has three ports: RF, DC and RF+DC. The RF port passes RF (“AC”), the DC port is used to feed DC, and the RF+DC (“AC+DC”) port presents the combined signal to the device. The EC-BIAS-P can handle DC voltages up to 200 V and DC currents up to 1 A. Therefore, it is suitable for biasing high power transistor devices like GaN HEMTs. The EC-BIAS-P can also be used for static DC biasing.
The EC-BIAS-P’s RF-to-RF+DC path operates from 600 MHz to 5 GHz when considering a maximum insertion loss of 1 dB and minimum return loss of 10 dB. The DC-to-RF and DC-to-RF+DC isolation is > 10dB from 0.817 GHz to 5.0 GHz.
The EC-BIAS-P has excellent DC-to-RF+DC pulse performance exhibiting minimal pulse distortion from pulses with as low as 7 ns rise time. The pulse propagation delay from DC-to-RF+DC is 1.2 ns. The EC-BIAS-P also exhibits minimal distortion for pulsed RF inputs.

Specifications

Parameter Test Cond. Val.
Impedance 50 Ohm
Operating Frequency IL < 1dB 0.60 to 5.0 GHz
VSWR 0.6 to 5 GHz 1.25
Return Loss 0.05 to 5 GHz 10 dB max
0.711 to 3.925 20 dB max
Insertion loss 0.6 to 5 GHz 0.3 dB
Isolation 0.817 to 5 GHz 10 dB min
1.888 to 5 GHz 20 dB min
Pulse prop. delay DC to RF+DC port 1.2 ns
DC port voltage 200 VDC/pulsed
DC port current 1 ADC

 

Data

Type File Download
S-parameters .s2p

Download Data Sheet (PDF)

 

The post EC‐BIAS‐P High Power Pulsed Bias Network 600 MHz to 5 GHz appeared first on Echoic RF Store.

]]> https://store.echoicrf.com/product/ec%e2%80%90bias%e2%80%90p/feed/ 0 918 EC-WLK1-2450M Wilkinson Power Divider / Combiner for 2.45 GHz WiFi/ISM/Bluetooth/Zigbee https://store.echoicrf.com/product/ec-wlk1-2450m/ https://store.echoicrf.com/product/ec-wlk1-2450m/#respond Thu, 27 Aug 2020 07:21:02 +0000 http://store.echoicrf.com/?post_type=product&p=904 The EC-WLK1-2450M is a high performance Wilkinson power divider/combiner realized using microstrip transmission-lines on a low-loss microwave laminate.  This power divider/combiner can be used for test and measurement or for educational demonstration.  The power divider/combiner is centered at the widely-used 2.45 GHz WiFi/ISM/Bluetooth/Zigbee band with a bandwidth of 700 MHz when considering a return loss of 20dB.  In-band loss is very low at 0.2dB providing an equal split to the two ports.  The in-band isolation is > 20dB for over 1GHz of bandwidth.

Quantities greater than our inventory can be backordered, please contact us.

The post EC-WLK1-2450M Wilkinson Power Divider / Combiner for 2.45 GHz WiFi/ISM/Bluetooth/Zigbee appeared first on Echoic RF Store.

]]> The EC-WLK1-2450M is a high performance Wilkinson power divider/combiner realized using microstrip transmission-lines on a low-loss microwave laminate.  This power divider/combiner can be used for test and measurement or for educational demonstration.  The power divider/combiner is centered at the widely-used 2.45 GHz WiFi/ISM/Bluetooth/Zigbee band with a bandwidth of 700 MHz when considering a return loss of 20dB.  In-band loss is very low at 0.2dB providing an equal split to the two ports.  The in-band isolation is > 20dB for over 1GHz of bandwidth.  The power divider can be used over an even larger frequency range when considering different isolation and return loss requirements.  This Wilkinson power divider/combiner is realized on high performance, low-loss Rogers substrate material.  The power divider/combiner is equipped with female SMA connectors on all three ports.  The backside solder mask is absent, enabling it to be surface mounted if the connectors are removed.

Specifications

Impedance 50 ohm
Center Frequency 2.450 GHz
Bandwidth 20dB Return Loss 700 MHz
VSWR 2.029 to 2.694 GHz 1.3 max
Insertion loss 2.029 to 2.694 GHz 3.2dB typ
Isolation 2.029 to 2.694 GHz 21dB min
Phase Imbalance Between ports 2 + 3 0.5 deg max
Input power CW 1 W min

 

Data

Type File Download
S-parameters .s2p

Download Data Sheet (PDF)

 

The post EC-WLK1-2450M Wilkinson Power Divider / Combiner for 2.45 GHz WiFi/ISM/Bluetooth/Zigbee appeared first on Echoic RF Store.

]]> https://store.echoicrf.com/product/ec-wlk1-2450m/feed/ 0 904 EC-BPF3-2450M-100 Bandpass Filter for 2.45 GHz WiFi/ISM/Bluetooth/Zigbee https://store.echoicrf.com/product/ec-bpf3-2450m-100/ https://store.echoicrf.com/product/ec-bpf3-2450m-100/#respond Sun, 12 Jul 2020 03:52:25 +0000 http://store.echoicrf.com/?post_type=product&p=771 The EC-BPF3-2450M-100 is a high performance bandpass filter realized using microstrip transmission-lines on a low-loss microwave laminate.  This filter can be used for test and measurement or for educational demonstration.  The filter passes the widely-used 2.45 GHz WiFi/ISM/Bluetooth/Zigbee band with a bandwidth of 100 MHz and an out of band rejection of > 35dB at 2.05 GHz and 2.85 GHz.

Quantities greater than our inventory can be backordered, please contact us.

The post EC-BPF3-2450M-100 Bandpass Filter for 2.45 GHz WiFi/ISM/Bluetooth/Zigbee appeared first on Echoic RF Store.

]]> The EC-BPF3-2450M-100 is a high performance bandpass filter realized using microstrip transmission-lines on a low-loss microwave laminate.  This filter can be used for test and measurement or for educational demonstration.  The filter passes the widely-used 2.45 GHz WiFi/ISM/Bluetooth/Zigbee band with a bandwidth of 100 MHz and an out of band rejection of > 35dB at 2.05 GHz and 2.85 GHz.  The third order filter is realized using side-coupled microstrip elements for low loss and high power handling and also acts as a DC block.  As a transmission line-based microstrip circuit, the filter will exhibit a periodic response at 4.9 GHz.   The filter is equipped with female SMA connectors on both ports.  The backside solder mask has been cleared, enabling it to be surface mounted.

Specifications

Impedance 50 ohm
Center Frequency 2.450 GHz
Bandwidth 3dB BW 100 MHz
Passband VSWR 1.7 max
In-band loss 2dB max
Out-of-band rejection At 2.050 GHz 50 dB min
At 2.850 GHz 35 dB min
Input power CW 10 W min

 

Data

Type File Download
S-parameters .s2p

Download Data Sheet (PDF)

 

The post EC-BPF3-2450M-100 Bandpass Filter for 2.45 GHz WiFi/ISM/Bluetooth/Zigbee appeared first on Echoic RF Store.

]]> https://store.echoicrf.com/product/ec-bpf3-2450m-100/feed/ 0 771 EC-ADP-18-MM 1.85 mm (Male) to 1.85 mm (Male) Adapter https://store.echoicrf.com/product/ec-adp-18-mm/ https://store.echoicrf.com/product/ec-adp-18-mm/#respond Tue, 05 Sep 2017 17:29:09 +0000 http://store.echoicrf.com/?post_type=product&p=630 The EC-ADP-1818-MM is a high precision 50 ohm coaxial 1.85 mm (Male) to 1.85 mm (Male) adapter for general purpose RF and microwave use.

Quantities greater than our inventory can be backordered, please contact us.

The post EC-ADP-18-MM 1.85 mm (Male) to 1.85 mm (Male) Adapter appeared first on Echoic RF Store.

]]> The EC-ADP-1818-MM is a high precision 50 ohm coaxial 1.85 mm (Male) to 1.85 mm (Male) adapter for general purpose RF and microwave use.  These high performance connectors are used in a wide variety of test and measurement settings ranging from cellular to satellite communications for the proper matching of equipment and cable interconnect.  The connectors are constructed from a durable stainless steel and are designed to withstand repeated use. They feature an air dielectric with a loss-loss plastic center conductor support.

Specifications

Characteristic Impedance 50 ohm
Frequency Range DC to 65 GHz
VSWR < 1.25
Durability > 1000 cycles
Operating Temperature -55C to +125C
Body Material Stainless Steel SUS304, Polished and Passivated
Center Contact Material Beryllium Copper, Gold Plated
Center Contact Support Material Polyetherimide (PEI)

Download Data Sheet (PDF)

The post EC-ADP-18-MM 1.85 mm (Male) to 1.85 mm (Male) Adapter appeared first on Echoic RF Store.

]]> https://store.echoicrf.com/product/ec-adp-18-mm/feed/ 0 630 EC-ADP-18-MF 1.85 mm (Male) to 1.85 mm (Female) Adapter https://store.echoicrf.com/product/ec-adp-18-mf/ https://store.echoicrf.com/product/ec-adp-18-mf/#respond Tue, 05 Sep 2017 17:25:31 +0000 http://store.echoicrf.com/?post_type=product&p=624 The EC-ADP-1818-MF is a high precision 50 ohm coaxial 1.85 mm (Male) to 1.85 mm (Female) adapter for general purpose RF and microwave use.

Quantities greater than our inventory can be backordered, please contact us.

The post EC-ADP-18-MF 1.85 mm (Male) to 1.85 mm (Female) Adapter appeared first on Echoic RF Store.

]]> The EC-ADP-1818-MF is a high precision 50 ohm coaxial 1.85 mm (Male) to 1.85 mm (Female) adapter for general purpose RF and microwave use.  These high performance connectors are used in a wide variety of test and measurement settings ranging from cellular to satellite communications for the proper matching of equipment and cable interconnect.  The connectors are constructed from a durable stainless steel and are designed to withstand repeated use. They feature an air dielectric with a loss-loss plastic center conductor support.

Specifications

Characteristic Impedance 50 ohm
Frequency Range DC to 65 GHz
VSWR < 1.25
Durability > 1000 cycles
Operating Temperature -55C to +125C
Body Material Stainless Steel SUS304, Polished and Passivated
Center Contact Material Beryllium Copper, Gold Plated
Center Contact Support Material Polyetherimide (PEI)

Download Data Sheet (PDF)

The post EC-ADP-18-MF 1.85 mm (Male) to 1.85 mm (Female) Adapter appeared first on Echoic RF Store.

]]> https://store.echoicrf.com/product/ec-adp-18-mf/feed/ 0 624 EC-ADP-2435-MM 2.4 mm (Male) to 3.5 mm (Male) Adapter https://store.echoicrf.com/product/ec-adp-2435-mm/ https://store.echoicrf.com/product/ec-adp-2435-mm/#respond Tue, 25 Jul 2017 21:37:03 +0000 http://store.echoicrf.com/?post_type=product&p=199 The EC-ADP-2435-MM is a high precision 50 ohm coaxial 2.4 mm (Male) to 3.5 mm (Male) adapter for general purpose RF and microwave use.

Quantities greater than our inventory can be backordered, please contact us.

The post EC-ADP-2435-MM 2.4 mm (Male) to 3.5 mm (Male) Adapter appeared first on Echoic RF Store.

]]> The EC-ADP-2435-MM is a high precision 50 ohm coaxial 2.4 mm (Male) to 3.5 mm (Male) adapter for general purpose RF and microwave use.  These high performance connectors are used in a wide variety of test and measurement settings ranging from cellular to satellite communications for the proper matching of equipment and cable interconnect.  The connectors are constructed from a durable stainless steel and are designed to withstand repeated use. They feature an air dielectric with a loss-loss plastic center conductor support.

Specifications

Characteristic Impedance 50 ohm
Frequency Range DC to 26.5 GHz
VSWR < 1.25
Durability > 1000 cycles
Operating Temperature -55C to +125C
Body Material Stainless Steel SUS304, Polished and Passivated
Center Contact Material Beryllium Copper, Gold Plated
Center Contact Support Material Polyetherimide (PEI)

Download Data Sheet (PDF)

The post EC-ADP-2435-MM 2.4 mm (Male) to 3.5 mm (Male) Adapter appeared first on Echoic RF Store.

]]> https://store.echoicrf.com/product/ec-adp-2435-mm/feed/ 0 199